Technical Specifications
|
Parameter |
Specification |
|
Product Type |
1.00mm Pitch IDC Housing / Cable |
|
Connector Type |
IDC Receptacle |
|
Pitch |
1.00mm (0.0394 in) |
|
Circuit Options |
2–14 circuits |
|
Rated Current |
0.5A AC/DC |
|
Rated Voltage |
50V DC |
|
Operating Temperature |
-40°C to +105°C |
|
Contact Resistance |
≤20 mΩ |
|
Insulation Resistance |
≥100 MΩ |
|
Dielectric Withstanding Voltage |
500V AC/minute |
|
Housing Material |
PA66, UL94V-0 |
|
Housing Color |
Beige / Gray |
|
Terminal Material |
Phosphor Copper |
|
Terminal Plating |
Tin |
|
Locking Type |
Friction Lock |
Cross-Reference Table
Custom Cable Assembly
|
Customization Item |
Available Specification |
|
Wire Type & Size |
Discrete UL1061 / UL1571 wire, AWG 28–32 |
|
Assembly Configuration |
Single-ended with tinned/stripped wire ends or double-ended IDC connectors |
|
Pin Assignment |
1-to-1, reversed, or customer-defined pin mapping |
|
Cable Length |
50–2000 mm, tolerance ±3 mm |
|
Wire Color |
Standard colors or customer-specified wire colors |
|
Circuit Count |
2–14 circuits according to the selected connector configuration |
|
Connector Housing |
1.00mm pitch IDC housing in beige or gray |
Quality Assurance & Compliance
Connector Inspection: Housing appearance, terminal position and connector configuration are checked against the specified model.
Cable Verification: Wire type, conductor size, cable length and termination condition are checked against the order specification.
Material Compliance: Products can be supplied to meet RoHS 2.0 and REACH requirements.
Flame Retardancy: The specified PA66 housing material meets UL94V-0 requirements.
Batch Documentation: Inspection reports and Certificates of Conformance (COC) can be supplied with applicable production batches.
Order & Logistics Information
MOQ: 500 pcs per model; custom cable assemblies may require a different MOQ depending on wire specification and configuration.
Samples: Samples are available for dimensional, interface and wiring verification. Standard sample lead time is 3–5 days, subject to model and material availability.
Production Lead Time: Standard orders typically require 7–10 days. Custom cable assemblies may require additional time depending on wire specification, pin mapping and order quantity.
Packaging: Finished connectors and cable assemblies are packed in moisture-resistant PE bags and export cartons to protect terminals, housings and cable ends during transportation.
Shipping Methods: Express delivery by DHL, UPS or FedEx is available for samples and smaller shipments. Air freight and sea freight are available for larger orders.
Trade Terms: Orders can be arranged under FOB, CIF or DDP terms according to the destination and shipping requirements.
Bulk Orders: Carton quantities and shipping arrangements can be confirmed based on the selected model, cable configuration and total order volume.
FAQ
Q: How can I confirm that this IDC connector will fit my existing assembly?
A: Provide the mating connector model, product drawing or physical sample. We can compare the connector configuration and relevant dimensions with the requested specification before production.
Q: Can you manufacture a connector based on a sample rather than an existing part number?
A: Yes. A physical sample can be used as a reference for connector configuration and cable assembly requirements. Engineering details can then be confirmed before quotation and production.
Q: Can you provide drawings or dimensional data for engineering review?
A: Dimensional drawings and relevant technical information can be provided for model selection and engineering verification, subject to the product configuration.
Q: Can the connector be used in a new PCB design?
A: Yes. The 1.00mm pitch format is suitable for compact PCB layouts. Engineers should confirm the housing dimensions, contact arrangement and mating interface against the PCB footprint before finalizing the design.
Q: Can the same connector family be supplied in different circuit counts?
A: Yes. The series covers multiple circuit configurations from 2 to 14 positions, allowing projects with different conductor counts to use the same connector family.
Q: Can you reproduce an existing cable assembly with the same pinout?
A: Yes. Existing cable assemblies can be reproduced based on an approved sample, wiring diagram or pin assignment. The required connector configuration, wire specification and pin mapping should be confirmed before production.
Q: How do you handle custom pin assignments?
A: Custom pin mapping can be defined from the customer's wiring diagram or pinout table. The specified mapping is used as the reference for assembly and electrical testing.
Q: Can you support recurring production orders with the same configuration?
A: Yes. Once the connector model, cable specification, pin assignment and approved production requirements are confirmed, the same configuration can be used for subsequent production orders.
Q: What should I provide if I am replacing an existing connector from another supplier?
A: Provide the original manufacturer, part number, circuit count, connector photos or drawing, mating connector information and, if possible, a physical sample. This allows the required configuration to be checked before a replacement is quoted.
Q: Can you support OEM or private-label cable assembly orders?
A: OEM cable assembly orders can be discussed based on the required connector configuration, wiring specification, pin assignment, labeling and packaging requirements. Production details are confirmed against the customer's approved specification before volume manufacturing.
Hot Tags: a1007(ssr)made in china ssr 1.00 idc housing cable, China a1007(ssr)made in china ssr 1.00 idc housing cable suppliers, factory