Replaces SM10B-SRSS-TB

Replaces SM10B-SRSS-TB
Details:
Replacement for JST SM10B-SRSS-TB, a 1.00 mm pitch SMD right-angle header with 10 circuits, single-row friction-lock construction and tape-and-reel packaging. The substitute uses a UL 94V-0 housing with phosphor copper contacts and tin or gold plating options, supporting compact PCB assemblies requiring a right-angle wire-to-board interface.
Send Inquiry
Description
Send Inquiry
Replacement for JST SM10B-SRSS-TB, a 1.00 mm pitch SMD right-angle header with 10 circuits, single-row friction-lock construction and tape-and-reel packaging. The substitute uses a UL 94V-0 housing with phosphor copper contacts and tin or gold plating options, supporting compact PCB assemblies requiring a right-angle wire-to-board interface.
11

 

Technical Specifications

 

Parameter

Specification

Product Type

SMD Right-Angle Header

Replacement Model

SM10B-SRSS-TB

Alternative Model

A1000RS010AALPTPB8112

Circuit Count

10 Circuits

Pitch

1.00 mm (0.0394 in)

Mounting Type

SMD

Orientation

Right-Angle

Rows

Single Row

Locking Structure

Friction Lock

Rated Current

1A AC/DC

Rated Voltage

50V DC

Operating Temperature

-40°C to +105°C

Contact Resistance

≤20 mΩ

Insulation Resistance

≥100 MΩ

Withstanding Voltage

500V AC/minute

Housing Material

PA66/PBT, UL 94V-0

Housing Color

White

Terminal Material

Phosphor Copper

Terminal Plating

Tin / Gold Plating

Pin Body Material

LCP/PA9T, UL 94V-0

Pin Body Color

Gray / Beige

Pin Material

Phosphor Copper, Tin/Gold Plating

Pin Holder Ground Disc

Phosphor Copper, Tin/Gold Plating

 

M10B-SRSS-TB Cross-Reference

 

For buyers sourcing a direct alternative to SM10B-SRSS-TB, the key identification points are the 1.00 mm pitch, 10-circuit single-row configuration, right-angle SMD mounting and friction-lock structure.

Brand

Original Model

Alternative Model

Configuration

JST

SM10B-SRSS-TB(LF)(SN)(P)

A1000RS010AALPTPB8112

1.00 mm pitch, SMD, right-angle, 10 circuits, single row, friction lock, tape & reel

 

SMT Assembly Compatibility

01/

PCB Placement: Verify connector position, footprint and surrounding component clearance.

02/

Right-Angle Orientation: Confirm mating direction and connector height within the finished PCB assembly.

03/

Soldering Process: Evaluate placement and soldering performance using the customer's existing SMT equipment and process parameters.

04/

Inspection: Check solder joints, connector position and mechanical condition after assembly.

05/

Production Validation: Run representative PCB assemblies through the normal assembly and inspection process before production approval.

 

Single-Row Configuration for Compact PCB Connections

 

10-Circuit Layout: Maintains the target 10-position configuration for the SM10B-SRSS-TB replacement.


Single Row: Provides a compact contact arrangement compared with dual-row alternatives.


Friction Lock: Adds mechanical retention at the mating interface.


Right-Angle Structure: Directs the mating connection parallel to the PCB surface.


SMD Mounting: Supports automated PCB assembly processes.

 

Mating & Replacement Verification

 

Original Model Identification
Confirm the existing SM10B-SRSS-TB model, ordering suffix and PCB application.

 

Mechanical Check
Compare pitch, circuit count, mounting orientation, connector dimensions, locking structure and PCB clearance.

 

Mating Check
Verify engagement with the corresponding mating connector, including insertion, retention and connector positioning.

 

SMT Validation
Evaluate the replacement through the customer's normal placement, soldering and inspection process.

 

Production Release
After engineering approval, maintain the qualified model as the purchasing reference for repeat production.

 

Tape & Reel Supply for SMT Production

Packaging

Tape and reel for SMT components.

01

MOQ

1,000 pcs per model; samples available for evaluation.

02

Lead Time

7–15 working days for standard orders.

03

Shipping

Express, air and sea freight available.

04

Trade Terms

FOB, CIF and DDP supported.

05

 

FAQ

 

Q: Can this alternative be added as a second source while keeping JST as the primary supplier?

A: Yes. The alternative can be evaluated as a second-source option after engineering and purchasing approval. This approach can reduce dependence on a single connector supplier while keeping the existing JST source available.

Q: What information should procurement provide when requesting a quotation?

A: Procurement should provide the target part number, required quantity, annual demand if available, required packaging format, delivery destination and any existing supplier or BOM requirements. A drawing or sample is useful when the application has additional mechanical requirements.

Q: Can the alternative be used for long-term OEM production?

A: Yes. For recurring OEM production, buyers should establish the approved alternative model in the BOM or approved vendor list and define the required quality and change-control conditions before volume purchasing.

Q: How can buyers control consistency between different production batches?

A: Buyers can use an approved part number and controlled specification as the purchasing reference, while checking incoming samples against agreed dimensional, material and electrical requirements. Batch records can also be retained for recurring orders.

Q: What should be done if the original JST connector becomes difficult to source?

A: Procurement can qualify the alternative before a supply shortage occurs. Early sample evaluation and approval allows the substitute to be introduced with less disruption when the original component has extended availability or delivery issues.

Q: Does using an alternative connector require customer approval?

A: It depends on the customer's quality system and product change-control procedure. OEM and regulated applications may require customer approval, deviation approval or an updated approved vendor list before the alternative enters production.

Q: Can the alternative be purchased for prototype and engineering builds before mass production?

A: Yes. Samples can be used for prototype assembly, mating evaluation and engineering validation before a production order is released. This allows the buyer to identify application-specific issues before committing to volume quantities.

Q: How should a qualified connector alternative be controlled after supplier approval?

A: The approved manufacturer model, specification, revision and purchasing description should remain consistent in the procurement system. Any changes to materials, plating, construction or manufacturing conditions should be handled through the customer's normal change-control process.

Q: What are the main risks when replacing an established connector supplier?

A: The main risks are not limited to the connector itself. Buyers should consider supplier consistency, production capacity, change management, batch traceability, quality documentation and long-term availability when approving a replacement source.

Q: Can procurement request samples from the same production source used for later volume orders?

A: This should be confirmed with the supplier before qualification. Using samples representative of the intended production configuration helps engineering and procurement reduce the risk of differences between qualification samples and subsequent production lots.

Hot Tags: replaces sm10b-srss-tb, China replaces sm10b-srss-tb suppliers, factory, 1 00mm pitch, A1005 NH Buckle Alternative NH 1 00mm Crimp Terminal Housing, A1008 SHL SHLD alternative SHL 1 00mm SHLD Housing Terminal Wafer, A1009 501330 Made in China 501330 1 00 Housing Terminal, Replaces JST SM15B SHLS TF, Replaces SM10B SRSS TB

Send Inquiry