Technical Specifications
|
Property |
Specification |
Test Condition / Material |
|
Current Rating |
0.2A AC/DC |
- |
|
Voltage Rating |
30V DC |
- |
|
Operating Temperature |
-40°C to +105°C |
- |
|
Contact Resistance |
≤ 30 mΩ Max. |
Initial |
|
Insulation Resistance |
≥ 100 MΩ Min. |
- |
|
Withstanding Voltage |
200V AC / 1 minute |
No breakdown |
|
Housing Material |
LCP UL94V-0, Black |
- |
|
Terminal Material |
Phosphor Copper, Gold Plated |
- |
|
SMT Pin Material |
Phosphor Copper, Tin/Gold Plated |
- |
0.60mm Ultra-Fine-Pitch Design
The A0600 uses a 0.60mm contact pitch to reduce connector spacing and support higher connection density within a limited PCB area. Compared with 1.00mm connector platforms, the smaller pitch is intended for applications where connector footprint and component placement are major design constraints.
Key design considerations include:
• 0.60mm Pitch: Provides a compact contact arrangement for space-constrained PCB designs.
• 2–16 Circuits: Covers common low- to medium-circuit interconnection requirements.
• Right-Angle SMT Configuration: Supports horizontal cable entry and compact board layouts.
• Fine-Pitch Mating Interface: Housing and wafer should be selected as a matched pair based on circuit count and mating geometry.
A0600 XSR Replacement & Cross-Reference
Connection Architecture & PCB Integration
The A0600 uses a compact wire-to-board connection structure:
Cable / Wire → IDC Receptacle Housing → Right-Angle SMT Wafer → PCB
Before design approval, the following points should be checked against the mating connector and PCB:
• Circuit count and 0.60mm pitch
• Receptacle and wafer mating geometry
• PCB pad layout and pin position
• Right-angle mounting orientation
• Contact plating and electrical requirements
Customization
Custom cable length, wire gauge, pinout and connector configuration.
Ultra-fine wire options, including AWG #36–#32 where applicable.
Circuit count, mating orientation and connector arrangement based on project requirements.
Samples can be provided for mating, PCB assembly and dimensional verification before bulk production.
Quality & Compliance
LCP High-Temperature Material: Housing and SMT wafer insulation use LCP UL94V-0 material, suitable for the specified SMT soldering process. Reflow temperature requirements should be confirmed against the customer's process profile.
CCD Visual Inspection: Optical inspection can be used to check fine-pitch pin position, coplanarity, cavity alignment and critical dimensions.
Electrical Testing: Contact resistance, insulation resistance and dielectric withstand performance are checked against the specified electrical requirements.
Compliance Documentation: RoHS and REACH documentation can be supplied according to project requirements; COC and third-party inspection reports can be arranged when specified.
Packaging & Logistics
SMT Tape & Reel Packaging:
SMT Wafers/Headers are packed in Carrier Tape & Reel for automated SMT pick-and-place machines; Housings/Terminals in anti-static PE bags.
Flexible MOQ:
1,000 pcs for standard connectors; 500 pcs for custom cable assemblies (trial orders welcome).
Fast Lead Time:
3–5 days for engineering samples; 7–12 working days for mass production.
Global Shipping & Incoterms:
Flexible export arrangements via DHL/FedEx/UPS Express, Air, and Sea Freight (FOB, CIF, DDP supported)
FAQ
Q: Can I order A0600 connectors for an existing XSR-based design?
A: Yes. A0600 can be evaluated for existing XSR-based applications. Provide the original part number, mating connector information or product drawing so the appropriate model can be reviewed before ordering.
Q: How do I select the correct A0600 model?
A: Model selection mainly depends on circuit count, mating geometry, PCB layout and mounting orientation. The original connector part number or drawing is the most efficient reference for model identification.
Q: Can A0600 be used with a connector from another manufacturer?
A: It may be possible when the mating dimensions, contact arrangement, PCB footprint and electrical requirements match. Cross-reference should be verified before production rather than relying on pitch alone.
Q: Can you verify compatibility from a physical sample?
A: Yes. A physical sample can be used for dimensional, mating and PCB assembly evaluation when drawings or complete part numbers are unavailable.
Q: Can A0600 be supplied without cable assembly?
A: Yes. Housing, terminals and SMT wafers can be supplied as connector components. Finished cable assemblies are also available when required.
Q: What information should I provide for an A0600 quotation?
A: The preferred information includes the required A0600 model or reference part number, circuit count, order quantity, mating component, cable requirements and any packaging or labeling requirements.
Q: Can you support prototype orders before mass production?
A: Yes. Prototype or sample quantities can be arranged for engineering evaluation before a production order is released. This allows mating, PCB fit and assembly requirements to be confirmed in advance.
Q: Can the same A0600 specification be maintained for repeat orders?
A: Yes. The approved model, materials, plating and production specifications can be used as the reference for repeat orders. Any requested specification change should be confirmed before production.
Q: Can you provide documentation for incoming quality inspection?
A: Quality and compliance documents can be supplied according to project requirements, such as product specifications, material information, RoHS/REACH documentation and COC where applicable.
Q: Can you handle OEM packaging and customer-specific labeling?
A: Yes. Customer-specific packaging, labels and shipment identification can be discussed for production orders, subject to the required artwork, packaging format and order quantity.
Hot Tags: a0600(xsr)made in china xsr 0.60mm housing/terminal/smt wafer, China a0600(xsr)made in china xsr 0.60mm housing/terminal/smt wafer suppliers, factory
